Boring eye chips?

Got boring eye chips you want to get rid off or want to exchange for something else?
Well I have a solution just for you! (lol is this a commercial?)  ⊙ω⊙

～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～
Tutorial:
Materials needed:
-White acrylic or any color of acrylic you want to use.
-Tooth pick.
-A clean cloth
～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～


Steps:
1.) Open your doll's head carefully! (note: Don't loose the screws!)
Tutorial:Head opening, eye mech removal

2.) Either remove the eye chips or you can work with it while its still attached to the eye mech.

3.) Use the tooth pick and dump it on your acrylic paint.

4.) Design the eye chips. If you make a tiny mistake leave it be and let it dry a little then use the clean side of the tooth pick and use it like an eraser. Or if you made a whole lot of mistakes, use the clean cloth to wipe it, then try again. (The acrylic is not permanent and its easy to remove from the eye chips)
Warning: Avoid smearing some acrylic paint on your pullip's head! You will need to sand it off if do!

5.) After plenty of mistakes now you have a finish product! You can always change the design once you get bored from its looks.
～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～

Sleep eyes!

Since Fridart is a pullip Prunella who was released on the year of 2007, she can only wink.
Now the newer version of the Pullip can now actually hold there eyes in place while its closed, thus the sleepy eyes are born!

Of course the older pullip dolls would love to have a wink of sleep if they can! Duh!
I mean imagine yourself not able to close your eyes and able to sleep! Scary right! ヽ(ﾟДﾟ)ﾉ

So Fridart here would love to have those sleepy eyes modification....thus a surgery is needed!
Tutorial: Sleepy Eyes!

Be careful!
Or you might end up like me with a bloody finger! ヽ(´□｀。)ﾉ

Now Fridart, only needed some thicker eye lashes and she could pull off the sleepy eyes perfectly! (⌒.−)＝★

Neck Melt!

Found out about this problem here: Neck Melt!

I feared this one very much since, I knew Fridart would come with an SBH obitsu body.
This particular obitsu body has some kind of content in its neck that can melt a pullip's head!
Oh noes! Σ(ﾟДﾟ|||)
I mean seriously! ヽ（゜ロ゜；）ノ
Oh well.....I guess no doll is perfect. Even the great almighty obitsu has some "issues".(；¬д¬) 

When Fridart arrived, I knew I would have to expect some melting issues with her....and alas, I was indeed correct. (ノдヽ) 

Of course I needed to prevent the obitsu body from further damaging my $100+ worth of doll....that I work so hard for.
I used this Tutorial:  Solve melting neck part!

Its not that hard! You only have to change the teflon tape when you needed to.....I suggest, checking the tape once a month.

Photo Time# 1

:*・°☆ `*:PHOTO TIME:*・°☆ `*:

～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～

Will do this blog post often!

Its photo time for Fridart!

～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～☆～